Start playback, Activate repeat playback, Stop playback – JVC HR-J645ES User Manual
Page 16: Playback (cont.), Repeat playback, Soundtrack selection (hr-j645ek/es only)
16
PLAYBACK (cont.)
q
¢
¢
1
¡
¶
1
4
¢
7
3
8
¡
1
2
3
4
5
6
7
/
8
0
9
4
2
1
3
Repeat Playback
Your video recorder can automatically play back the whole tape
20 times repeatedly.
START PLAYBACK
1
Press PLAY.
ACTIVATE REPEAT
PLAYBACK
2
Press PLAY and hold for over 5 seconds, then release.
● The Play indicator ($) on the display panel blinks
slowly.
● The tape plays 20 times automatically, and then
stops.
STOP PLAYBACK
3
Press STOP at any time to stop playback.
NOTE:
Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.
Soundtrack Selection (HR-J645EK/ES only)
Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing AUDIO MONITOR on the remote control changes the soundtrack being played back as follows:
TRACK (On-Screen Display)
USE
HI FI
For Hi-Fi stereo tapes
L
R
HI FI
For main audio of Bilingual tapes
L
HI FI
For sub audio of Bilingual tapes
R
NORM
For audio-dubbed tapes
HI FI
For audio-dubbed tapes
NORM
NOTES:
●
"L + R" should normally be selected. In this mode, Hi-Fi
stereo tapes are played back in stereo, and the normal
audio track is played back automatically for tapes with
only normal audio.
●
For instructions on recording NICAM stereo and
bilingual programmes, refer to page 35.
●
Bilingual programmes are not currently broadcast in
the U.K. and Ireland.
●
"O.S.D." must be set to "ON" or the on-screen
displays will not appear (
੬
pg. 34).
PLAY
PLAY
STOP
PAUSE
FF
REW
STOP
FF
REW
AUDIO MONITOR