JVC GC X 3 - Manual (Page 69)

EN
69
Setting the Date and Time
This procedure sets the camera’s internal clock. Use this procedure to reset the time and date if you take the
camera overseas, or if the clock otherwise needs to be reset.
1 Turn the Power dial to “SET”.
•Hold the Lock button down while turning the
Power dial.
•The SET UP screen appears.
2 Press the r t button to select “DATE/TIME”,
and then press the EXE button.
•The DATE/TIME screen appears.
3 Press the r t button to select “YEAR”,
“MONTH”, “DAY”, “HOUR”, “MINUTE”, or
“STYLE”, and press the w e button to change
the settings.
4 Press the r t button to select “END”, and
then press the EXE button.
•The SET UP screen returns.
NOTES:
● The date and time that are set are stored in
memory powered by the backup battery. The
backup battery is recharged when the camera is
connected to a power source, such as the AC
adapter, for at least 24 hours.
● The clock will not function if the minutes are not
set.
● The date and time display are stored in memory
only as shooting information. The date and time
are not recorded in the image itself.
1
2–4
SET UP
POWER SAVE
BEEP
No. RESET
FORMAT
DATE/TIME
1min.
HIGH
EXE
EXE
EXE
DATE/TIME
YEAR
MONTH
DAY
HOUR
MINUTE
STYLE
END
2000
12
24
10
00
DMY
EXE
4
OFF
M
4
SET
V