JVC GC X 3 - Manual (Page 41)

EN
41
CAMERA SETTING
FRAME
QUALITY
Q. REVIEW
W. BALANCE
SENS.
TELEPHOTO
M. DRIVE
AF/AE
CLEAR
1024X768
FINE
ON
AUTO
80
2X
OFF
MULTI
EXE
4,5
1
OFF
M
4 SET
V
7,8
3,6
Changing the Zoom Power While Shooting
Depending on the image size, it is possible to enlarge a subject without sacrificing the current image quality.
Because the zoom power cannot be changed in some instances if the image is large, reduce the image size
(
੬ pg. 28) before changing the zoom power.
1 Turn the Power dial to “M”.
•Hold the Lock button down while turning the
Power dial.
2 Select “MANUAL” with the MODE switch.
•“MANUAL” appears on the LCD panel.
3 Press the DISPLAY button until the CAMERA
SETTING screen appears.
4 Press the r t button to select “TELEPHOTO”.
5 Press the w e button to select “2X” or “3.2X”.
•It is not possible to turn off the LCD screen.
•The zoom powers that can be selected
depend on the image size.
•When frame size is set to 2032 x 1536 only
1X telephoto is available.
1024 x 768: 1X/2X
640 x 480: 1X/2X/3.2X
6 Press the DISPLAY button to turn off the menu
screen.
7 Point the lens at the subject, position yourself,
and half-press the Shutter button.
•The camera will continue to focus on the
subject while the button is half-pressed.
The shoot standby lamp (green) flashes.
8 Press the Shutter button all the way to take
the picture.
2
7