JVC HR-DD845EK - Manual (Page 42)

42
Manual
Channel Set
TUNER SET (cont.)
Storing Channels Manually
Store channels that were not stored during Auto Set Up (
੬
pg.
8) or Auto Channel Set (
੬
pg. 40).
ACCESS MAIN MENU
1
Press MENU twice.
ACCESS CONFIRMATION
SCREEN
2
Press PUSH JOG %fi to move the highlight bar (pointer)
to “MANUAL CH SET”, then press OK. The Confirma-
tion screen appears.
SELECT POSITION
3
Press PUSH JOG %fi until an open position in
which you want to store a channel begins blinking,
then press OK. The Manual Ch. Set screen appears.
INPUT CHANNEL
4
The number "21" appears
blinking to the right of
"CH". Press the NUMBER
keys to input the channel
number you want to store.
● For fine tuning adjust-
ment, press PUSH JOG
until the channel
number begins blinking,
then press PUSH JOG
%fi. While tuning, “F+” or “F–
” appears.
ENTER NEW CHANNEL
INFORMATION
5
Press OK and the Confirmation screen appears.
● Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION
SCREEN
6
Press MENU.
● To input the station name, see page 44.
● To change positions, see "Change Station Preset
Position" (
੬
pg. 43).
%
%
1 2
4 5
3
6
8
0
7 9
2
4
1
3
NUMBER
PUSH JOG
OK
MENU
5
5
MANUAL CH SET
PR CH
01 CH21
[ 5∞]/ [0-9] : SELECT
[ ] : CURSOR ↔
: OK
[MENU] : EXIT
%
ATTENTION
After you have stored channels manually, be sure to
perform Guide Program Number Set (
੬
pg. 10) in order to
get proper results from Video Plus+ timer recording.