JVC HR-DD845EK - Manual (Page 30)

30
EDITING
Edit To Or
From Another
Video
Recorder
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player’s 21-pin SCART connector to the
recorder’s 21-pin SCART connector as illustrated on the
below.
When Using Your Video Recorder As The Source
Player . . .
. . . connect its AV1 IN/OUT connector to the recording
deck.
When Using Your Video Recorder As The Recording
Deck . . .
. . . . connect its AV2 IN or AV1 IN/OUT connector to the
source player.
SET RECORDING DECK’S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or TV PROG to select depending on the
connector being used — “AU-1” for the AV1 IN/OUT
connector, or “AU-2” for the AV2 IN connector.
START SOURCE PLAYER
3
Engage its Play mode.
START RECORDING DECK
4
Engage its Record mode.
NOTES:
● All necessary cables can be obtained from your dealer.
● If you use this recorder as the player for editing, be sure to
turn off 3R Picture before starting. (
੬
pg. 15)
1 2
4 5
3
6
8
0
7 9
2
4
1
3
NUMBER "0"
Another recorder
RF Cable
(provided)
Another recorder
Recorder
21-pin SCART Cable
(not provided)
Player Your recorder Recorder Your recorder TV Receiver TV Receiver
RF Cable
(provided)
21-pin SCART
Cable
(not provided)
Player
VIDEO
CHAN-
NEL or
AV mode
VIDEO
CHAN-
NEL or
AV
mode
TV PROG