GE 99000 GE Bluetooth USB Adapter Audio & Data - Manual (Page 10)

10
3) Verify that the receiver is within the specifi ed range of 100m
from the adapter.
4) Check if any other Bluetooth
® device has connected to the receiver.
5) Turn off the receiver and unplug the GE 99000 adapter.
Power on the receiver and plug in the GE 99000 adapter and try
connecting
again.
No music is being transmitted.
In rare cases it may be necessary to manually set your computer to
play through your Bluetooth
® device. To do this, follow these steps:
1) Plug the GE 99000 into an open USB port
2) Wait for it to confi gure.
3) Go to START settings > Control Panel
4) Select Sounds and Audio Devices
5) Select Audio Tab
6) Use the drop down menu in sound playback to set default device
to Audio Adapter
7) Select Apply and OK
8) Restart your computers media player and select a song and Play
For technical support, please see the manual located on the
included disc or visit www.bluesoleil.com
Specifi cations
Standard, Power Class Bluetooth ® 1.2 compliant, Class 1
Interface USB v1.1 (Type A)
Profi le Supported - AV Mode A2DP, AVRCP Profi le
Profi le Supported - HCI Mode Generic Access (GAP)
Service Discovery Application (SDAP)
Serial Port (SPP)
Dial-Up Network (DUN)
FAX
File transfer (FTP)