Digital audio dubbing, A pg. 64, 69 – JVC DR-DX5SU User Manual
Page 64

Filename [DX5SUS_12Editing.fm]
Masterpage:Left+
64
EN
EDITING
Page 64
Thursday, 1 September 2005 14:35
You can dub selected audio from a DVD or Audio CD disc to a
digital audio device.
However, it is not possible to dub copy-protected discs.
Example: Dubbing to an MD
1
Connect the unit and a digital audio device using either an
optional optical cable or an optional coaxial cable.
2
Place a disc on the unit and load an MD on the connected
digital audio device.
3
Select the audio to be dubbed.
4
Start playback slightly before the actual point from where you
wish to start dubbing.
5
Press
W to pause playback.
6
Select the input mode on the connected digital audio device.
7
Press
I to start playback on the unit.
8
Start recording on the digital audio device.
9
Stop recording on the digital audio device. Then press
o to stop
playback on the unit.
NOTE:
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
Digital Audio Dubbing
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/DBS/DVD switch to DVD.
Rear of unit
Note for connection:
Remove the protection cap from the optical
cable.
Digital audio device
(MD deck, etc.)
Coaxial cable
(not supplied)
Player
Recorder
To [DIGITAL AUDIO
OUT (COAXIAL)]
To [DIGITAL AUDIO
OUT (OPTICAL)]
Optical cable
(not supplied)
DX5SUS_00.book Page 64 Thursday, September 1, 2005 2:35 PM