Menu configuration—main menu, Cont.) – JVC 0110SKH-MW-MT User Manual

Page 14

Operation guide
Shows the buttons for each
operation.

• The menu automatically disappears in about 30 seconds after the previous operation.
• Some items may not appear on the menu depending on the input or the input signal.
• The items controlled by the MAKE system do not appear on the menu.

AUDIO SETTING

Settings for the audio output balance, EMBEDDED AUDIO signals and level meter

Item

To do

Setting value

BALANCE

Adjust the balance between the right and left speakers.

L5 – L1, 0, R1 – R5

AUDIO1 ASSIGN.

Select the video input which the audio signal through
AUDIO ASSIGN (IN 1) terminal is assigned to.

SDI-1, SDI-2, DVI, COMP/
RGB, VIDEO-1, VIDEO-2

AUDIO2 ASSIGN.

Select the video input which the audio signal through
AUDIO ASSIGN (IN 2) terminal is assigned to.

E.AUDIO GROUP*

Select the audio channel group of the EMBEDDED AUDIO
signals.

☞ “NOTE”

LEVEL METER
SETTING*

Adjust the level meter display for the EMBEDDED AUDIO
signals.

☞ “NOTE”

LEVEL METER ch

Select how the audio channels are displayed on the level
meter.

OFF, LINE (Displays
the channels 1 – 6 at
the left of the screen
and 7 – 12 at the right.),
DIVIDE (Displays the odd
channels at the left of
the screen and the even
channels at the right.)

BAR TYPE

Select the color of the level meter display.

3COLORS (3 colors to
indicate variations in input
levels), W.100 (white)

REFERENCE
LEVEL

Select the standard input level indicated on the level meter.

–20dB, –18dB

OVER LEVEL

Select the input level’s lower limit indicated in red for the
“3COLORS” display.

–10dB, –8dB, –6dB,
–4dB, –2dB

BAR
BRIGHTNESS

Select the brightness of the level meter.

LOW, HIGH

PEAK HOLD

Activates/deactivates the peak hold function of the level
meter.

OFF, ON

Memorized for each input.

Settings of “E.AUDIO GROUP”

The setting values and selectable audio channels of EMBEDDED AUDIO signals are as follows.

(G means GROUP)
1G:

channel(s) 1/2/3/4/1+2/3+4/1 – 4 (1G)

2G:

channel(s) 5/6/7/8/5+6/7+8/5 – 8 (2G)

1-2G:

channel(s) 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/1 – 8 (1G+2G)

3G:

channel(s) 9/10/11/12/9+10/11+12/9 – 12 (3G)

1-3G:

channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/1+2/3+4/5+6/7+8/9+10/11+12/1 – 4 (1G)/5 – 8 (2G)/

9 – 12 (3G)/1 – 8 (1G+2G)/1 – 12 (1-3G)

Example of the level meter display —Level meter position and audio channels

Ex.: When “LEVEL METER ch” is set to “LINE” and “BAR TYPE” is set to “3COLORS”

OVER LEVEL

REFERENCE LEVEL

Yellow

Green

Red

NOTE

• The level meter with no audio signal input is displayed in white for “3COLORS”, and in gray for “W.100.”
• You can select the position of the level meter display—top or bottom of the screen (

☞ “POSITION” in

“INFORMATION” on page 18).

• When “PEAK HOLD” is set to “ON,” the maximum level meter value will remain displayed for a set period of

time. (At the time the signal input level reaches the highest value.)

Menu Configuration—MAIN MENU

(cont.)

Adjustment bar
Displayed when selecting
“BALANCE.”

For the operation procedure, see page 7.

DT-V24G1_20L3G_EN.indd 14

10.1.15 3:22:21 PM