Jrv210, Ipod operation – Jensen JRV210 User Manual

Page 14

JRV210

iPod OPERATION

This unit is equipped with an iPod ready function that will allow you to control your iPod (if
compatible) using the control panel control buttons. The following iPod versions are supported:

•

iPod Nano (1G, 2G, 3G, 4G and 5G)

•

iPod 5G

•

iPod Classic

•

iPhone, iPhone 3G, iPhone 3GS

•

iPod Touch

•

iPod Touch 2G

NOTE: iPod and iPod Cable sold separately.

Accessing iPod Mode

If AUTO IPOD “ON” is selected in the system menu,
your iPod will play automatically when connected to
the unit. “iPod” will appear in the upper left corner of
the display.

If AUTO IPOD “OFF” is selected in the system menu,
your iPod will not play automatically when connected.
In this case, press the MODE button (4) to change to
IPOD mode.

If you press the BAND, WB or MODE button during
iPod playback, the iPod will resume playback when
you return to IPOD mode.

Turning the iPod On/Off

The iPod power turns on automatically when an iPod is connected to 30-pin iPod cable, as
long as the vehicle ignition is turned on. You can turn the iPod off by disconnecting it from the
cable or by turning the ignition off. When the ignition is turned off, the iPod will pause and then
enter sleep mode after 2 minutes. While the iPod is connected, the power cannot be turned on
or off from the iPod itself.

NOTE: The iPod will continuously recharge when connected to the unit, as long as the
vehicle ignition is turned on.

Selecting a Playlist

When an iPod is playing, press the PTY/CAT/MENU button (13) to display the playlists on
the LCD.

Turn the TUNE/ENTER control (22) to change the playlist between Artist / Album /Genre /
Song / Audiobook / Podcast.

Press the TUNE/ENTER control to confirm the selected playlist.

While searching a playlist, press the PTY/CAT/MENU button (13) to navigate back
through the list.

Controlling Playback

Play/Pause

Press the >/|| button (26) to suspend playback. Press the >/|| button again to resume playback.

Selecting Tracks

During playback, press the SEEK \/ / /\ button (19, 20) to play the previous or next track in the
current category. Press the SEEK /\ button (20) once to play the song from the start position or
press SEEK \/ twice to play the previous track.

Press and hold the SEEK \/ / /\ button (19, 20) to fast reverse/forward the song. iPod playback
will continue when the button is released.

The track information display can be changed to emphasize either artist or song title by
pressing the INFO/DISP button (14).

Repeat Play

Press the RPT button (5) to repeat play the current song. Press RPT again to stop repeat play.

Previewing Tracks

Press the INT button (6) on the control panel to play the first 10 seconds of each file in the
current folder sequentially. Press INT again to stop Intro Scan and resume normal playback of
the current file.

iPod

photo

iPod

mini

iPod

nano

HEAD UNIT

Jensen iPod Ready Cable

Optional iPod Adaptor

iPod

Video

JRV210

FAV

PTY/CAT

INFO
DISP