Setting menu (continued) – JVC DLA-HD550 User Manual
Page 36
4
Settings
36
Setting Menu (Continued)
Installation > Lens Control
21
Lens Control
Controls the individual motorized function of the lens when setting up the projector
Focus
Function for adjusting the lens focus.
Zoom
Function for adjusting the lens zoom.
Shift
Function for adjusting lens shift. (Press the up/down/left/right button to shift the screen).
Image Pattern
On
Displays the image pattern in conjunction with the above setting items.
Display
Display for “Focus”:
for “Zoom” and “Shift”:
(Picture of big green grids) (Picture of small green grids)
Off
Without displaying the image pattern, displays the external input signal.
Lock
On
Disables lens adjustment.
A warning message appears when the [LENS] button on the remote control is pressed.
Off
Enables lens adjustment.
Installation > Pixel Adjust
22
Pixel Adjust
Makes fine adjustments of 1 pixel unit for each minor color shift in the horizontal/vertical direction of the image.
Horiz. Red
(Move red to left) 1 to 7 (Move red to right)
Horiz. Green
(Move green to left) 1 to 7 (Move green to right)
Horiz. Blue
(Move blue to left) 1 to 7 (Move blue to right)
Vert. Red
(Move red down) 1 to 5 (Move red up)
Vert. Green
(Move green down) 1 to 5 (Moves green up)
Vert. Blue
(Move blue down) 1 to 5 (Move blue up)
●
The horizontal and vertical directions are reversed when the image is flipped to the left or right, or flipped up or down.
●
To adjust, use still images with distinct outlines.
●
As the adjustments are minor, the effect may be difficult to see for some images.
Installation > Installation Style
23
Installation Style
Flips the image to the left or right, up or down according to the projection state of the projector.
Front
Select this for tabletop front projection.
Ceiling Mount (F)
Select this for ceiling front projection.
Rear
Select this for tabletop rear projection.
Ceiling Mount (R)
Select this for ceiling rear projection.
Installation > Keystone
24
Keystone
Compensates for trapezoidal distortion caused by installation.
●
If the “Shift Adjustment” is excepting 0%, the image may be projected on the screen incorrectly when trapezoidal distortion is
compensated. (
P20)