JVC V.NETWORKS VN-C10 - Manual (Page 76)

76
Troubleshooting
Forgotten the VN-C10 IP ad-
dress that was changed with
[V.Networks Setup Tool].
Unable to record.
While “Now Connecting…” is
being displayed, it takes time to
cancel an action.
The coloration is unsatisfactory.
Image size changes automati-
cally.
Connection to VN-C10 cannot
be established or fails.
Others
Symptoms Remedial Actions
• Press the [Search] button of [V.Networks Setup Tool] to
see the IP addresses of all the cameras connected to the
network.
• Has the folder for saving images been deleted?
Check to see if it exists.
• Is the disk full? Check the available memory capacity.
• Once connection is activated, canceling an action is not
possible.
• Check the color adjustments of the monitor and video
cards.
Change to the True Color (24 bits) display.
• With High Color (16 bits) or lower, display of natural
color tones is difficult to achieve.
• In the case that VN-C10 is connected to multiple PCs, VN-
C10 assumes the settings of the PC that was last oper-
ated.
• When the network is loaded with frequent broadcasting or
collisions, connection may fail or break. Check the net-
work status.
VN-C10_E_62-78.pm65e 14/04/03, 10:19 AM 76