JVC HR-J440U - Manual (Page 10)

10
EN
INITIAL SETTINGS (cont.)
SELECT MODE
5
At the Override Auto
Clock Set screen, move the
highlight bar (arrow) to
“SEMI-AUTO CLOCK SET”
by pressing CH▲▼ or
SHUTTLE PLUS
%fi, then
press OK.
ACCESS SELECT SCREENS
6
At the Semi-Auto Clock Set
screen, move the highlight
bar (arrow) to the desired
mode by pressing CH▲▼
or SHUTTLE PLUS
%fi,
then press OK.
To select the Host Channel
— step 7
To select the Time Zone — step 8
To select the D.S.T. mode — step 9
NOTE:
The time that has been set previously by the Plug &
Play function will be erased when any of the three
settings mentioned above is changed.
SELECT HOST CHANNEL
7
You can either select
"AUTO", or enter a PBS
channel number. For
automatic selection, press
MENU if "AUTO" is
highlighted on the Host
Channel Select screen. To
manually select "AUTO" or
the PBS channel, press
CH▲▼ or SHUTTLE PLUS
%fi to cycle through
"AUTO" or the channel numbers (hold button down to
speed through numbers) and stop when the desired
number appears. Press MENU and the Semi-Auto Clock
Set screen reappears.
NOTES:
● For cable box users: Select "AUTO" or the channel
on your VCR that receives the cable box channels,
and set the cable box to the PBS channel.
● There are some PBS channels that do not transmit
clock setting data.
Semi-Auto
3
¶
4 ¢
7 8
1 ¡
1 2 3
4 5 6
7 8
0
9
2 2
q 5 / 8 6
OK
MENU
MENU
OK
CH
CH
SHUTTLE PLUS
OVERRIDE AUTO CLOCK SET
AUTO CLOCK SET
=SEMI–AUTO CLOCK SET
MANUAL CLOCK SET
PRESS ( 5,∞), THEN (OK)
PRESS (MENU) TO END
SEMI–AUTO CLOCK SET
= HOST CHANNEL SELECT
TIME ZONE SELECT
D.S.T. SELECT
PRESS ( 5,∞), THEN (OK)
PRESS (MENU) TO END
HOST CHANNEL SELECT
(CATV)
CH AUTO
PRESS ( 5,∞) TO SELECT
PRESS (MENU) TO END