JVC GET0241-001B - Manual (Page 6)

6
ENGLISH
Setting the clock
1
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H,” “CLOCK M,” “LEVEL,” “B. SKIP,”
or “EXT IN” appears on the display.
2
Set the hour.
1 Select “CLOCK H” (hour) if not shown on
the display.
2 Adjust the hour.
1 2
3
Set the minute.
1 Select “CLOCK M” (minute).
2 Adjust the minute.
1 2
4
Finish the setting.
To check the current clock time or change the
display mode
Press DISP (display) repeatedly.
Each time you press the button, the
display mode changes as follows:
• During tuner operation:
• During tape operation:
• During CD changer operation:
• During external component operation:
• During power off:
The power turns on and the clock time is
shown for 5 seconds, then the power turns off.
Frequency Clock
Play mode (TAPE) Clock
Clock LINE IN
Clock
Elapsed playing time
Disc number
EN05-06KS-FX555[UN]f.p65 17/5/04, 9:42 AM 6