JVC LCT1616-001A - Manual (Page 38)

37
STATUS DISPLAY: See page 25.
Sets if you want the input terminal and the type of signal to be indicated on the screen just after inputs are switched.
CONTROL LOCK: See page 26.
Sets the Monitor so that it cannot be operated with the buttons on itself.
REMOTE SWITCH: See page 27.
Set the selectable input terminals when controlling the Monitor with the external control unit.
HD SIGNAL MODE: See page 27.
Select the High-Definition (HD) signal type.
WHITE BALANCE: See page 19.
Adjusts R GAIN, G GAIN and B GAIN finely each for “HIGH” and “LOW” settings of the color temperature.
TIMER: See page 28.
Sets the clock and the Power On/Off Timer.
PIXEL SHIFT: See page 29.
Sets a screen saver.
POWER SAVE: See page 29.
Sets the power save function.
COLOR-REVERSE: See page 30.
Use to reduce the afterimage on the screen of the still picture by reversing the color.
REFRESH: See page 31.
Use to reduce the whitish image remaining on the screen after turning off the power.
reset: See page 33.
Resets the Setup Menu settings to defaults.
all reset: See page 33.
Resets the all menu settings and adjustments to defaults.
HOUR METER x 100h: See page 25.
Use to confirm the hours of use.
MODEL NAME: See page 25.
Use to confirm your model name.
EN_34_42_GM_V42C.p65 04.1.14, 1:22 PM 37