JVC MP-XP731GB - Manual (Page 89)

EN
89
Display
Q.
The PC is turned on but nothing appears on the screen.
A.
If the screen blacks out during operation, check the following.
• When the (Stand By) lamp is lit.
• Move the stick or press any key on the keyboard to check if the power-saving function is
working.
• Check if the display is configured as an external display device.
While pressing Fn , press F10 . (Each time you do this, you can change between external
display and LCD modes.)
• To adjust the LCD display brightness:
Pressing Fn and F1 turns the screen darker.
Pressing Fn and F2 turns the screen brighter.
• When the (Stand By) lamp is flashing.
The PC is in standby mode (The power-saving mode is working).
Press the On/Off key or any key on the keyboard.
Important
Pressing the
(On/Off) key for more than 4 seconds terminates Windows forcibly, discarding
the unsaved data.
• When the (Stand By) lamp is not lit.
The PC is turned off. Press the (On/Off) key to turn on your PC.