JVC KD-AVX11 - Manual (Page 24)

24
ENGLISH
~
Select “Bluetooth Phone.”
Ÿ
Enter the menu.
!
Establish the connection with a device,
then make a call (or settings using the
menu).
☞ pages 37, 44 – 46
FLAT
Connected Device Name
Bluetooth Phone
3:45 PM
POWER ]ON
Connected device
name
* 1
Using the Bluetooth cellular phone
* 1 Each time you press
5 ∞, the registered device name
(and “NEW DEVICE” when a new device can be registered)
appear in turn.
* 2 Appears only when the information comes from the
device.
* 3 You can adjust the volume level for “Bluetooth Phone”
without affecting the volume level for other sources.
Status of the device * 2
Signal strength/Battery remainder
Bluetooth icon
lights up when the adapter is connected.
Adjust the
volume
* 3
When a call comes in...
Name and phone number (if acquired)
• The source is automatically changed to
“Bluetooth Phone.”
When is activated...
The unit answers the incoming calls automatically.
(☞ page 46)
• When <Auto Answer> is deactivated, press any
button (except ATT or +/–) to answer the
incoming call.
To end the call
Hold any button (except
ATT or +/–).
• You can adjust the microphone volume level. (☞
page 46)
Deleting a registered device
1
Select “Bluetooth Phone” or “Bluetooth
Audio,” then select a registered device you
want to delete.
2
Perform steps 2 and 3 on page 22, then...
• Select <Delete Pair>, then <Yes>.
EN22-27_KD-AVX11J_f.indd 24 EN22-27_KD-AVX11J_f.indd 24 07.2.20 5:15:33 PM 07.2.20 5:15:33 PM