JVC Digital Photo Navigator ImageMixer with VCD LYT1116-001A - Manual (Page 5)

EN
5
Master Page: Right-Heading0
_001EN_PDF_03M3D7S-PhotoNavi.fm Page 5
INTRODUCTION
This document consists of the following three sections and an Appendix.
Before use, please read the Software Installation and USB Connection Guide for preparation.
Ⅲ Loading Still Images (Windows ® )
This section explains how to load still images into the album of the Digital Photo Navigator software.
Ⅲ Playing Back and Handling Images (Windows ® )
This section explains how to handle still images using the Digital Photo Navigator software. You can send still
images by e-mail and store an album as a web page.
Ⅲ ImageMixer with VCD (Windows ® and Macintosh)
This section introduces the ImageMixer software. In addition to capturing still images and creating albums,
ImageMixer is used for a variety of other functions, including color and brightness adjustment, and capturing
videos through a USB cable or a DV cable. ImageMixer is also used to edit your captured video and then
create a Video CD.* For details, refer to the ImageMixer online help.
* To create a Video CD, a CD-R drive is necessary. If you are using a Windows
® PC, refer to the following web
site for a drive that is compatible with Windows ® :
http://www.imagemixer.com
If you are using a Macintosh PC, the application Toast™ by Roxio, Inc. is also necessary.
Ⅲ Appendix
This appendix explains how to use a camcorder to hold a video conference over the Internet and how to load
images into the PC that does not have a USB connector. This appendix also contains troubleshooting and
index.
Reading this document