beautypg.com

Advanced features – JVC GR-DV801 User Manual

Page 71

background image

EN

71

Master Page: Right

Advanced features

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

13. The focus does not adjust

automatically.

13. • Focus is set to the Manual

mode.

• The recording was done in a

dark place, or the contrast
was low.

• The lens is dirty or covered

with condensation.

13. • Set Focus to the Auto mode.

(

੬ pg. 45)

• Clean the lens and check the

focus again. (

੬ pg. 77)

14. In the 5-Second mode,

recording ends before
5 seconds have elapsed.

14. • The 5-Second mode is set to

“Anim.” in MANUAL Menu.

14. • Set “5S” to “5S” in MANUAL

Menu. (

੬ pg. 31, 36)

15. Snapshot mode cannot be

used.

15. • The Squeeze mode

(SQUEEZE) is selected.

15. • Disengage the Squeeze

(SQUEEZE) mode.
(

੬ pg. 31, 37)

16. The color of Snapshot looks

strange.

16. • The light source or the

subject does not include
white. Or there are various
different light sources behind
the subject.

• The Sepia (SEPIA) or

Monotone (MONOTONE)
mode is activated.

16. • Find a white subject and

compose your shot so that it
also appears in the frame.
(

੬ pg. 23, 42)

• Disengage the Sepia (SEPIA)

and Monotone
(MONOTONE). (

੬ pg. 31,

34)

17. The image taken using

Snapshot is too dark.

17. • Shooting was performed

under backlit conditions.

17. • Press BACK LIGHT.

(

੬ pg. 47)

18. The image taken using

Snapshot is too bright.

18. • The subject is too bright.

18. • Set “r” to “SPOTLIGHT”.

(

੬ pg. 33)

19. White Balance cannot be

activated.

19. • The Sepia (SEPIA) or

Monotone (MONOTONE)
mode is activated.

19. • Disengage the Sepia (SEPIA)

or Monotone (MONOTONE)
mode before setting White
Balance. (

੬ pg. 34)

20. Wipe/Fader effects do not

work.

20. • The Power Switch is set to

“A”.

20. • Set the Power Switch to “M”.

(

੬ pg. 13)

21. The Black & White Fader does

not work.

21. • The Sepia (SEPIA) or

Monotone (MONOTONE)
mode is activated.

21. • Disengage the Sepia (SEPIA)

and Monotone
(MONOTONE).
(

੬ pg. 31, 34)

22. Program AE with special

effects does not work.

22. • The Power Switch is set to

“A”.

22. • Set the Power Switch to “M”.

(

੬ pg. 13)

23. The image looks like the

shutter speed is too slow.

23. • When shooting in the dark,

the unit becomes highly
sensitive to light when
“GAIN UP” is set to
“AUTO”.

23. • If you want the lighting to

look more natural, set “GAIN
UP” to “AGC” or “OFF”.
(

੬ pg. 31, 35)

RE

FERENCES

GR-DV801US.book Page 71 Wednesday, January 22, 2003 5:39 PM