JVC GR-DV801 - Manual (Page 56)

56
EN
Master Page: Left-Heading0
USING THE REMOTE CONTROL UNIT
The Full-Function Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional
playback functions possible. (
੬ pg. 58)
Installing The Batteries
The remote control uses two “AAA (R03)” size
batteries. Refer to “General Battery Precautions”
(
੬ pg. 74).
1
Remove the battery compartment cover while
pushing up the tab as illustrated.
2
Insert two “AAA (R03)” size batteries in the
correct direction.
3
Re-attach the battery compartment cover.
Beam Effective Area (indoor use)
When using the remote control, be sure to point it at
the remote sensor. The transmitted beam’s
approximate effective distance for indoor use is 5 m
(16 ft).
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor is
directly exposed to sunlight or powerful lighting.
1
3
2
+
– +
–
Tab
Insert the minus (–) end first.
Remote sensor
GR-DV801US.book Page 56 Wednesday, January 22, 2003 5:39 PM