Specifications, General, English – JVC KS-FX845R User Manual
Page 41

41
ENGLISH
SPECIFICATIONS
AUDIO AMPLIFIER SECTION
Maximum Power Output:
Front:
45 W per channel
Rear:
45 W per channel
Continuous Power Output (RMS):
Front:
17 W per channel into 4
Ω, 40 Hz
to 20 000 Hz at no more than
0.8% total harmonic distortion.
Rear:
17 W per channel into 4
Ω, 40 Hz
to 20 000 Hz at no more than
0.8% total harmonic distortion.
Load Impedance: 4
Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
Bass:
±10 dB at 100 Hz
Treble:
±10 dB at 10 kHz
Frequency Response: 40 Hz to 20 000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
2.0 V/20 k
Ω load (250 nWb/m)
TUNER SECTION
Frequency Range:
FM1/FM2:
87.5 MHz to 108.0 MHz
FM3:
65.00 MHz to 74.00 MHz
AM: (MW) 522 kHz to 1 620 kHz
(LW)
144 kHz to 279 kHz
[FM Tuner]
Usable Sensitivity:
11.3 dBf (1.0
µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8
µV/75 Ω)
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 35 dB
Capture Ratio: 1.5 dB
[MW Tuner]
Sensitivity: 20
µV
Selectivity: 35 dB
[LW Tuner]
Sensitivity: 50
µV
CASSETTE DECK SECTION
Wow & Flutter: 0.11% (WRMS)
Fast-Wind Time: 100 sec. (C-60)
Frequency Response: 30 Hz to 16 000 Hz
(Normal tape)
Signal-to-Noise Ratio: 56 dB
Stereo Separation: 40 dB
GENERAL
Power Requirement:
Operating Voltage: DC 14.4 V
(11 V to 16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature: 0
°C to +40°C
Dimensions (W
× H × D):
Installation Size (approx.):
182 mm
× 52 mm × 150 mm
Panel Size (approx.):
188 mm
× 58 mm × 12 mm
Mass (approx.):
1.5 kg (excluding accessories)
Design and specifications are subject to change
without notice.
EN38-41_KS-FX845R[EE]f.p65
3/13/03, 12:13 PM
41