JBL CREATURE SELF POWERED SATELLITE SPEAKERS AND SUBWOOFER - Manual (Page 3)

Document Number: 950-0045-001 Description: MANUAL, CREATURE, ENGLISH
Revision: A Page 3 of 6
Harman Multimedia Confidential
Step 1 Connecting the speaker system to the computer:
•
If you have an integrated sound solution or a stereo sound card; connect the green connector from the subwoofer into
the green jack on the computer.
•
If you have a multi-channel sound card; connect the green connector from the subwoofer into the green jack on the
computer.
•
If you have a portable computer; connect the green connector from the subwoofer into the headphone jack on the
computer.
Step 2 Plug the orange connector from the right/control satellite into the orange jack on the subwoofer.
Step 3 Plug the brown connector from the left satellite into the brown jack on the subwoofer.
Step 4 Plug the AC power supply jack into the subwoofer.
Step 5 Plug the AC plug into the wall outlet.
Step 6 Turn on the speaker set and adjust the volume accordingly.
Placement of speakers
The speakers are magnetically shielded and can be placed close to a computer monitor without distorting the image. For
optimal stereo imaging, separate the speakers from each other by a distance equal to your distance from the speakers.
The subwoofer’s sound is non-directional; therefore, it does not have to be placed in any particular relationship to the satellites.
The subwoofer is magnetically shielded and can be placed on the desktop, if desired. If the subwoofer is placed too close to a
computer monitor it can cause vibration on the monitor screen.