JVC KD-DV4200 - Manual (Page 35)

35
English
Ref
erence
Problem Causes/Remedies
iP
od
iPod is not turned on. ¶ Connections are incorrect.
= Check the connecting cable and its connection.
Buttons do not work as
intended. ¶ The functions of the buttons have been changed.
= Press MODE before performing the operation.
Sound is distorted. ¶ The equalizer is activated on iPod.
= Deactivate the equalizer on iPod.
Playback stops. ¶ The headphones are disconnected during playback.
= Restart playback.
No sound is played when
connecting the iPod nano. ¶ The headphones are connected to the iPod nano.
= Disconnect the headphones from iPod nano.
“NO MAG” “NO IPOD”
appears on the display. ¶ Connections are incorrect.
= Check the connecting cable and its connection.
“NO FILES” appears on
display. ¶ No tracks are stored in the iPod.
= Import tracks to iPod.
“RESET 1”−”RESET 7”
appears on display. ¶ Communication failure occurs between adapter and iPod/
unit.
= Disconnect adapter from both unit and iPod. Then,
connect it again.
“RESET 8” appears on
display. ¶ Communication failure occurs between adapter and unit.
= Check the connection between adapter and unit.
iPod’s controls do not work
after disconnecting from
adapter. ¶ Communication failure occurs between adapter and iPod.
= Reset iPod.
About Repeat play/Random play on iPod/D. player
¶ ALL RPT: Functions as “Repeat All” for iPod.
Functions as “Repeat Mode = All” for D. player.
¶ SONG RND/RND ON: Functions as “Shuffl e Songs” for iPod.
Functions as “Random Play = On” for D. player.
EN_KD-DV4200[J]_f.indd 35 EN_KD-DV4200[J]_f.indd 35 12/16/05 1:02:34 PM 12/16/05 1:02:34 PM