JVC XM-EX90 - Manual (Page 35)

English
Deutsch
Français
35
XM-EX90
4 Press ENTER.
The change made above is entered temporarily in the
memory. The display shows “EDITING”.
1 2 3 4 5
Decrements by 1.
5 Press
0 to eject the MD.
The data in the memory is written in the MD before it is
ejected.
The display shows “UTOC writing” during MD write
operation.
• Be careful not to apply impact to the MD recorder
during writing data in the memory in the MD.
Otherwise the recording may be unplayable later.
• The data in the memory is written in the MD also
when the power is switched to the STANDBY mode
while “EDITING” is being displayed.
To exit editing:
Press EDIT before pressing ENTER in step 4.
Caution
Once erased, the track can never be restored. An MD containing recording that you do not want to
erase should be protected by sliding the tab (see page 55).
ENTER
INPUT
EN26-42.XM-EX90[J]/1 98.6.4, 0:09 PM 35