JVC KD-LH1101 - Manual (Page 9)

9
ENGLISH
Setting the clock
You can also set the clock system to either
24 hours or 12 hours.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 31 and 32.)
The next-step-operation
buttons start flashing.
2
Press number button 2 to select
“CLOCK”—Clock category of the
PSM settings.
The “Clock Hr” (hour) setting screen
appears on the display.
3
Adjust the hour.
4
Set the minute.
1 Select “Clock Min” (minute).
2 Adjust the minute.
1 2
5
Set the clock system.
1 Select “24H/12H.”
2 Select “24Hours” or “12Hours.”
1 2
6
Finish the setting.
To check the current clock time when the unit
is turned off, press D (DISP).
The power turns on and the clock time is shown
for 5 seconds, then the power turns off.
EN07-09KD-LH1101[E_EX]f.p65 2/26/03, 11:43 AM 9