GE 24922 GE Universal Remote 6 Device User Manual

Page 4

Direct Code Entry

Write your codes down here for easy reference
later.

1. Press and hold the SETUP button until

the red indicator stays on, then release
the SETUP button.

2. Press and release the desired mode

button (

VCR

, etc.). The red indicator

blinks, then stays lit.

3. Enter the 4 digit code from the code

tables (on separate
sheet). Note: after a
valid code entry, the
red indicator turns off.
For an invalid code, the
red indicator flashes.

4. With your device on,

press ON/OFF. If the

device turns off, no further
programming is required. Note: If
some buttons do not operate your
equipment, try one of the other
codes for your brand.

CHAN+ and CHAN- buttons perform the “Page+”
and “Page-” function for on-screen Guide Menus
used by some Satellite systems.
INFO button brings up Satellite Display screen for
current Channel and system information.
MENU brings up the Satellite Menu screen - use
with the UP, DOWN, LEFT & RIGHT navigation
buttons.
GUIDE Displays on-screen program guide.
OK button is used for on-screen Menu selection.
EXIT button is used to Exit or Clear on-screen
Menu displays.
INPUT button performs the Satellite TV/SAT func-
tion.

This remote controls many DVD functions. The

descriptions may vary from your original remote

descriptions.

REW and FF buttons control the speed of Fast

Forward and Reverse Playback respectively.

CHAN+/CHAN- buttons respectively locate the

succeeding or preceding Chapters or Tracks on a

disc.

INFO button brings up DVD Display or Control

Menu for Chapter/Track/Title number, Time remain-

ing/elapsed indication, system information, etc.

MENU brings up the DVD disc Menu screen - use

with the UP, DOWN, LEFT & RIGHT navigation

buttons.

OK button is used for on-screen Menu selection.

Note some DVD players require the Play button to

be used.

EXIT Exit On-Screen Menus and/or Return to

previous On-Screen selection.

PLAY button is used to start Disc playback and for

Menu selection on some DVD players.

STOP button stops Disc playback.

PAUSE button pauses Disc playback - press PLAY

to resume.

INPUT brings up the DVD Players Setup Menu.

Note, not all DVD Players support all the functions

described above.

DVD Functions

SAT Functions

Device

Device stored Code

VCR
CBL
DVD
SAT
AUX