GE 24922 GE Universal Remote 6 Device - Manual (Page 2)

3 2
Battery Installation
1. On the back of the remote, push down on the
tab and lift the cover off.
2. Match the batteries to the + and - marks inside
the battery case, then insert 2 AAA Alkaline
batteries.
3. Press the battery cover back into place.
Battery Saver
Your remote automatically turns off if the buttons
are depressed more than 30 seconds. This will save
your batteries should your remote get stuck in a
place where the buttons remain depressed (e.g.,
between the sofa cushions).
Code Saver
You will have up to 10 minutes to change the
batteries in your remote without losing codes you
have programmed. However, do not press any
buttons until batteries are installed in the remote. If
buttons are pressed without batteries in the remote,
all codes will be lost.
Code Setup
The SETUP button is used to setup the remote. You
can either setup the remote using the code for your
brand of product, from the code tables (on separate
sheet), or you can search through the library of
codes until you find a code that works for your
product. Please refer to “Programming with Code
Search” page 9 for more information on using the
code search feature to learn how to search through
the library of codes for your products. NOTE: You
can store any kind of code under any mode (except
TV). I.E. you can store a VCR code under the
CABLE button, or a DVD code under the VCR
button, etc. However, you can only store TV codes
under the TV button.
Setup
Congratulations on your purchase of the 24922
Universal Remote Control. The 24922 is one of the
most easy to use remote controls available today.
With the 24922 , juggling multiple remote controls is
a thing of the past! Your 24922 controls up to seven
devices, including the most popular brands of TV,
VCR, DVD, SAT, CBL, and audio equipment.
Note: Some functions from your original remote may
not be controlled by this remote. Use the original
remote, if available, to control such functions.
Sometimes buttons other than described in these
instructions may actually perform the function. For
example, the CHAN and VOL buttons might be
used to navigate through menu choices. We
recommend you experiment with the remote to
identify if such situations pertain to your equipment.
The 24922 is easy to use, easy to program, and it
gives you total control—at the touch of your
fingertips!
Table of Contents
Setup .................................................................... 3
Battery Installation ........................................... 3
Battery Saver ................................................... 3
Code Saver ...................................................... 3
Code Setup ...................................................... 3
Button Functions .................................................. 4
DVD Functions ................................................ 6
SAT Functions ................................................. 6
Code Entry ........................................................... 7
Direct Code Entry ............................................ 7
Code Search .................................................... 8
Using Your Remote ............................................... 9
Code Identification ........................................... 9
Controlling Devices with Power On and Off .... 10
Controlling Combo Devices ............................ 10
VCR/DVD/DVR Punch-Through ..................... 10
Volume/Mute Control and Punch-Through ....... 11
All Volume/Mute Control to any one Mode ...... 11
Setting any Mode for its own Volume/Mute .... 12
Sleep ............................................................. 13
Troubleshooting .................................................. 14