JVC 0397MKV*UN*VP - Manual (Page 27)

27
4 Click "Window" — "VCR" to call up the
VCR Operation window.
5 Operate the video source unit via the
VCR Operation window.
6 Click the "Capture" button on the desired
video image, and index image data (80 x
60 pixels) is transferred to the computer.
•The message "No.1 index image being
transferred." appears during data
transmission.
7 Repeat steps 5 and 6 as necessary.
8 Click "Transfer" button.
•If you want to capture full image data
(768 x 552 pixels) after capturing the
"Index Image" in step 2, click "Index &
Full Image" and then click the "Trans-
fer" button.
1. The message "Index No.1 being
scanned" appears while the video
source unit is scanning the picture to
be captured.
2. The message "No.1 index image being
transferred." appears and then "No.1
full image being transferred." appears
while the full image data is being
transferred to the computer.
3. The images captured in step 7 are
scanned by the video source unit and
automatically transferred to the
computer.
00:01:23:12F I
VCR
Capture
Transfer