Selecting 3d phonic mode, Changing the scanning mode, Changing the picture tone – JVC HX-GD7 User Manual
Page 23
19
Selecting 3D PHONIC Mode
While playing...
Presetting Automatic DVD Video Sound
Increase Level
The DVD Video sound is sometimes recorded at a lower
level than for other discs and sources. You can set the
increase level for the currently loaded DVD Video, so you
do not have to adjust the volume every time you change the
source.
As the number increases, sound level also increases.
Changing the Scanning Mode
This System supports progressive scanning.
If you connect a progressive TV through the COMPONENT
jacks, you can enjoy a high quality picture from the built-in
DVD player by selecting “PROGRESSIV.”
• PRGR. indicator lights on when progressive scanning
mode is selected.
Changing the Picture Tone
While showing a playback picture on the TV, you can select
the preset picture tone, or adjust it and store your own tastes.
To select a preset picture tone
1
Activate VFP.
2
Select a preset picture tone.
To adjust the picture tone
1
Select “USER1” or “USER2.”
• Follow steps
1
and
2
explained above.
2
Select a parameter you want to adjust.
3D ACTION
Suitable for action movies and sports
programs.
3D DRAMA
Creates natural and warm sound. Enjoy
movies in a relaxed mood.
3D THEATER
Enjoy sound effects like in a major
theater.
PROGRESSIV
Progressive scanning. For a
progressive TV.
INTERLACE
Interlaced scanning. For a
conventional TV.
INFO
3D ACTION
3D DRAMA
3D OFF
3D THEATER
3D PHONIC
ACTION
On the TV screen
Remote
ONLY
DVD LEVEL 1
DVD LEVEL 2
DVD LEVEL 3
INFO
Remote
ONLY
PROGRESSIV
INTERLACE
NORMAL
Normally select this.
CINEMA
Suitable for a movie source.
USER1/USER2
You can adjust parameters and can
store the settings (see below).
INFO
Remote
ONLY
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
0
0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
0
0
On the TV screen
NORMAL
CINEMA
USER2
USER1
HX-GD7.book Page 19 Wednesday, May 19, 2004 10:21 AM