JVC 50051243 - Manual (Page 8)

ENGLISH - 7 -
Menu System
Your TV has been designed with a menu system. Display
“MENU” (main menu) and enter one of four menus (PICTURE,
SOUND, INSTALL and FEATURE).
1- Press “MENU” button to display “MENU” (main menu). The
menu titles will be displayed in the main menu.
2- Press “ “ or “ ” button to select a menu title, then
press “ ” or “ ” button to enter the menu.
• To exit a menu, press “ STANDARD ” button.
• To go to the previous menu, press “MENU” button.
Picture Menu
To change picture settings:
• Press “MENU” button, now you are in main menu. In the
main menu, select PICTURE using “ “ or “ ” button,
then enter the picture menu pressing “ ” or “ ” button.
Note: When Picture Mode is not “USER”, BRIGHTNESS,
CONTRAST and COLOUR options can not be reached by
“
“ or “ ” buttons.
Factory Settings:
In the Picture Menu if you press the YELLOW button the ad-
justmens switches themselves to the factory settings.
You can change the values of this items firstly by selecting
the item by “ “ or “ ” button and then by using “ ” or
“ ” button. The PICTURE menu disappears and level indica-
tors are displayed while items are changed. The PICTURE
menu is restored after adjustment is finished.
This item is used to change the picture mode. By pressing
“ ” or “ ” button you may choose one of these options:
Bright, Standard, Soft, User.
Qvp‡ˆ rÃH‚qr
7 vtu‡r††
8‚‡ h†‡
8‚y‚ˆ
Tuh ƒr††
QD8UVS@
You can change Brightness only when Picture Mode is se-
lected User.
• You can change the Brightness by “ ” or “ ” button after
selecting this item.
You can change Contrast only when Picture Mode is select-
ed User.
• You can change the Contrast by “ ” or “ ” button after se-
lecting this item.
You can change Colour only when Picture Mode is selected
User.
• You can change the Colour by “ ” or “ ” button after select-
ing this item.
• You can change the Sharpness by “ ” or “ ” button after
selecting this item.
• You can adjust the Colour Temp item as Normal, Warm
and Cool. Using “ ” or “ ” button toggle between these
three settings.
8‚y‚ˆ
Tuh ƒr††
I‚v†rà rqˆp‡v‚
a‚‚€
8‚y‚ˆ ÃUr€ƒ
QD8UVS@
• The Noise reduction can be adjusted in four different lev-
els: Minumum, Medium, Maximum and Auto. Addition-
ally it can be cancelled by selecting the OFF option. Press-
ing “ ” or “ ” button toggles between these five settings.
• The Zoom can be three different modes: Auto, 4:3 or 16:9
modes. Using “ ” or “ ” button toggle between these differ-
ent screen formats.
The Picture Mode can be stored for all channels (200 chan-
nels) individually.
It is also possible to change picture modes directly by press-
ing “ZOOM” button (RED button) on your remote control.
• You can change the Hue for NTSC 3.58/4.43 systems by
“ ” or “ ” button after selecting this item. A level indicator for
Hue is displayed while changing this item. The Hue bar is
displayed while an NTSC signal is input from the EXT-1,
EXT-2, or EXT-3 (Front AV) terminal.
Recalling Factory settings.:
You can re-set the current PICTURE menu settings (except
Noise Reduction and Colour Temp settings) to the default
settings.
• Press “
STANDARD ” button when no menu appears.
Sound Menu
To change sound settings:
• Press “MENU” button, now you are in main menu. In the
main menu, select SOUND using “ “ or “ ” button,
then enter the sound menu pressing “ ” or “ ” button.
01-ENG-2834-AK52-1100UK-4-3-(AV-28RH4BU&SU).p65 27.04.2004, 10:46 7