Jwin JX-DVD400 - Manual (Page 48)

9.3.2. TV Display
Inside navigate to VIDEO SETUP PAGE TV DISPLAY
and press Here you can select the TV shape of ENTER.
the display. Normal/PS(pan scan) and Norma/LB(letter
box) should be selected when connected to a standard
4:3 TV. Wide Screen should be selected when connected
to a 16:9 wide screen TV.
(During playback of a wide screen recorded DVD disc
the TV screen will be not fully filled, regardless of the
TV display setting when connected to a standard 4:3 TV,
with the top and bottom of the screen left black.)
9.3.3.Component
Note: If TV screen has no output after selecting
, you can press key once, then press P-SCAN SETUP
RECALL PS or key to recovery, or you can switch off
the power supply, reset the player, and then press
RECALL
PS or key.
Inside navigate to VIDEO SETUP PAGE COMPONENT
a n d p r e s s Yo u c a n s e t t h e Y U V o u t p u t t o E N T E R .
PROGRESSIVE INTERLACE. or
P-SCAN:When connected to a progressive scan compatible
TV using component out connections, select P-SCAN.
INTERLACE: When connected to a standard TV using
S-Video or RCA connections, select INTERLACE.
If you select
connection, you should set up the play SCART
mode as state, then it will output nomally. RGB
31