Jwin JX-DVD400 - Manual (Page 45)

8.4.3 Listen to the Preset Radio Program
Choose Program in Sequence: choose the saved radio
program by pressing
and button in the remote
control or front panel.
Choose Program by Searching Frequency: Directly
press the
in the remote control to choose Numeric Button
the desired frequency, and then press the ENTER to listen
to the program of chosen frequency. For example, if you
want to listen to
you can enter and FM 106.9MHz, 1069
then press button. ENTER
Choose the Program directly by Inputting Numbers:
Press the
button in the remote control and SETUP VFD
will display , then enter the number and press LOAD XX
ENTER button, you can listen to the pre-saved radio
program. For example, if you want to listen to the program
saved in the 25th position, you
ll press the SETUP
button in the remote control, enter the number 2 and 5
after
displays , and then press VFD LOAD XX ENTER
button.
Note:1.The quantity of inputted numbers shall not exceed
the quantity of preset radio programs, otherwise it will
be of no effect.
2.Please choose the appropriate volume by adjusting the
Volume multi control knob in the front panel or pressing
Volume button in the remote control.
28