Unpacking the system – JBL 2.4G AW User Manual

Page 4

For more than 60 years, JBL has been involved in every aspect of
music and film recording and reproduction, from live performances
to the recordings you play in your home, car or office.

We’re confident that the JBL system you have chosen will provide
every note of enjoyment that you expected – and that when you think
about purchasing additional audio equipment for your home, car or
office, you will once again choose JBL.

Please take a moment to register your product on our Web site at
www.jbl.com. It enables us to keep you posted on our latest
advance-ments, and helps us to better understand our customers
and build products that meet their needs and expectations.

The JBL

On Air Control

2.4G AW is an advanced wireless

loudspeaker system that allows you to enjoy your favorite music in
remote locations around your home, or to add surround speakers to
your home theater system without running wires to the back of the
room. To ensure trouble-free performance, please carefully read
these instructions completely before connecting or using the
system.

UNPACKING THE SYSTEM

Carefully unpack the system. If you suspect damage from transit,
report it immediately to your dealer and/or delivery service.
Keep the shipping carton and packing materials for future use.
Open the package and verify the following contents:

Included
1 x Transmitter module

1 x Power supply for transmitter
1 x 230V 2-Prong AC power cord for transmitter power supply
1 x Wall-mount bracket for transmitter with 2 x panhead
M3 x 4 machine screws for attaching wall-mount bracket
to transmitter
4 x Small round self-adhesive feet – to be attached on
transmitter’s left side panel if transmitter is to be used vertically

1 x Active speaker/receiver (left-channel speaker)

1 x Power supply for active speaker/receiver
1 x Wall-mount holder for active speaker/receiver universal
power supply

1 x Passive speaker (right-channel speaker)
2 x Terminal covers for active and passive speakers
6 x M3 x 8 self-tapping screws to attach terminal covers
2 x Wall-mount rotatable brackets for active and passive speakers

(includes bar wrench and backup cords)

1 x Remote control
1 x Interconnect cable (1m/3.3 ft. RCA – RCA)
1 x Interconnect cable (1m/3.3 ft. RCA – 3,5mm (1/8-inch) mini plug)
10m/33 ft. x Speaker wire
1 x Owner’s manual (multilanguage)

THANK YOU FOR CHOOSING JBL

Remote Control

Wireless Transmitter

Left/Active Speaker
(Rear)

Right/Passive
Speaker

INPUT

MUTE

VOL

CODE

1 2 3 4

TO RIGHT SPEAKER

–

LEFT-CHANNEL SPEAKER

SUB-OUT LINE-IN

DC 20V

–

RIGHT-CHANNEL SPEAKER

TO LEFT SPEAKER

CODE

1 2 3 4

INPUT

0039CSK JBL On Air Control_2.4_AW_ENG_v5_GODKENDT:34199_Control_2_4G_Eng 10/06/08 15:57 Side 4