Using the cassette deck (listening to a tape), Playing a tape, One touch play – JVC ca-mxkb4 User Manual

Page 21: Press the, Push open part for the deck you want to use, Close the cassette holder gently, Press the tape a, Or tape b, Button

Using the Cassette Deck (Listening to a Tape)

The Cassette Deck allows you to play, record, and dub audio tapes.
❏ Listening to type I tape is suitable for this Cassette Deck.

One Touch Play

By pressing the TAPE A

3 or TAPE B 3 button, the System will

come on, and if a tape is in the deck, it will start to play. If no tape
is loaded, “NO TAPE” appears on the display, the System will
come on and wait for you to insert a tape, or select another function.

Playing a Tape

You can use either Deck A or Deck B at a time for playback.

Press the

PUSH OPEN part for the deck

you want to use.

When the cassette holder opens, put a cas-
sette in, with the exposed part of the tape
down, toward the base of the Unit.

The tape will travel from the left to right.

• If the cassette holder does not open, turn the System off,

then back on and press the

0 PUSH OPEN part again.

Close the cassette holder gently.

When both Deck A and Deck B contain a tape, the last deck to
have a tape inserted is selected.

Press the TAPE A

or TAPE B

button.

The selected Deck appears (for example, TAPE-A) and the
Deck indicator “A” or “B” lights up on the display.
The Tape indicator (

3) blinks on the display and the tape is

played back.
The Cassette Deck automatically stops when one side of the
tape has finished playing.

To stop playing, press the

7 button.

To remove the tape, stop the tape, and press the

0 PUSH

OPEN part to open the Cassette Holder.

To Fast-Wind a Tape

During playback or in Stop mode, press the

¡ (FF) button on the

Unit to fast-wind the tape onto the right side of the cassette without
playing. (You can also use the

¢ button on the Remote Control.)

During playback or in Stop mode, press the

22 (REW) button on

the Unit to fast-wind the tape onto the left side of the cassette with-
out playing. (You can also use the

4 button on the Remote Con-

trol.)
During fast-winding the tape, the Tape indicator (

3) goes out.

During fast-winding, the status bar illumination at the bottom of
the display moves counterclockwise.
During rewinding, it moves clockwise.
• The Cassette Deck automatically stops when one side of the

tape has finished playing.

❏ During fast-winding the tape, you can change the tape travelling

direction by pressing the

¡ (FF) or 22 (REW) button.

TAPE A

* When the System is in use, the display shows other items as well.

For simplicity, we show here only the items described in this section.

TAPE B

TAPE A

TAPE B

Deck indicators

3: Tape indicator

0 PUSH OPEN

(Deck A)

0 PUSH OPEN

(Deck B)

FM MODE

FM /AM

AUX

SLEEP

STANDBY/ON

SOUND

MODE

RHYTHM AX

FADE

MUTING

SELECT

RDS MODE DISPLAY MODE

VOLUME

PROGRAM /RANDOM

REPEAT

TAPE

REMOTE CONTROL

The use of tapes longer than 120minutes (including
120 minute tapes) is not recommended, since char-
acteristic deterioration may occur and these tapes
easily jam in the pinch-rollers and the capstans.

Tape travelling direction

MX-KB4(B).book Page 18 Tuesday, April 13, 2004 9:40 AM