beautypg.com

Playing back tapes, Playing back a tape, Press push open – JVC CA-UXG4 User Manual

Page 17: Close the cassette holder gently, Press tape

background image

14

If no cassette is inserted when you press TAPE

¤

“NO TAPE” appears on the display.

To stop playing, press

7.

To fast-wind to the left or to the right,
press

¢ or 4 (or UP ¢ or

DOWN

4 on the unit).

The tape direction indicator (

3 or 2 ) starts

flashing rapidly on the display.

To remove the cassette, press PUSH OPEN
on the unit while playback is stopped.

To play both sides—Reverse Mode

You can set the deck to play just one side of a tape, both sides
once, or both sides continuously.

On the remote control ONLY:

Press REV.MODE (reverse mode).

• Each time you press the button, the Reverse

Mode changes as follows:

: The deck automatically stops after playing both

sides of the tape. Stops when playback in the 2
directions are finished.

: The deck continues to play both sides of the tape 10

times, then stops playback automatically.

:

The deck automatically stops after playing one side
of the tape.

• DO NOT turn off the unit while playing back or

recording a tape. The cassette deck or tapes
may be damaged.

• The use of C-120 or longer tape is not

recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch
rollers and the capstans.

• This unit is not compatible with type II and type

IV tapes.

Playing Back a Tape

You can play back type I tapes only.

1

Press PUSH OPEN.

The cassette holder opens.

2

Put a cassette in with the exposed part of the
tape down.

3

Close the cassette holder gently.

• When a tape is inside of the cassette holder, the tape

direction indicator (

3 ) lights up on the display.

4

Press TAPE

¤ .

Playback starts (if the unit has been on
standby, the unit automatically turns on).
The tape direction indicator (

3 or 2 ) starts

flashing slowly on the display.
• Each time you press the button, the tape direction

changes:
3: plays the front side.

2: plays the reverse side.

When the tape plays to the end, the deck automatically
stops if the Reverse Mode is set to

or

. (See “To

play both sides—Reverse Mode.”)

Playing Back Tapes

DOWN

4

7

¢

UP

DOWN

4

7

¢

UP

REV.MODE

TAPE

PRESET

GROUP

PRESET

GROUP

UP

DOWN

PRESET

GROUP

PRESET

GROUP

UP

DOWN

PUSH OPEN

PUSH OPEN

10-14_UX-G4_UX-G3[B]3.p65

05.2.14, 8:27 PM

14