JVC RX-8020VBK - Manual (Page 49)

46
Searching for a Disc (Only for the CD player)
Search for a disc by its performer:
1. Press TEXT DISPLAY while “CD” is selected as
the source.
The Disc Information screen appears on the TV.
2. Press
5 or ∞ to move
to “SEARCH,” then
press SET.
The DISC SEARCH screen
appears.
3. Press 5 or ∞ to move
to “PERFORMER,”
then press SET.
The PERFORMER SEARCH
screen appears.
4. Press 5 / ∞ / 2 / 3 to move in front of the
first character of the performer you want to
search for, then press SET.
To correct the incorrect entry, press 5 / ∞ / 2 / 3 to move
in front of the correct character, then press SET.
Note:
Symbols such as @, # or $ are not be available for search.
5. Press SET again.
Disc search starts, then the
SEARCH RESULT screen
showing the performers
appears.
6. On the SEARCH RESULT screen, you can do the
following:
• Changing the indication of the disc information: Press 5 or
∞ to move to a searched-for disc, then press 2 or 3. Each
time you press 2 or 3, the disc information alternates
between its performer and its disc title.
• Starting a disc play and going to the Disc Information
screen (see page 45): Press 5 or ∞ to move to a
searched-for disc, then press SET.
• Showing unseen disc information (if more than 5 discs are
listed as a result of the search): Press 5 or ∞ until they
appear.
• Going back to the PERFORMER SEARCH screen: Press
EXIT.
Search for a disc by its disc title:
1. Press TEXT DISPLAY while “CD” is selected as
the source.
The Disc Information screen appears on the TV.
2. Press
5 or ∞ to move
to “SEARCH,” then
press SET.
The DISC SEARCH screen
appears.
3. Press 5 or ∞ to move
to “DISC TITLE,”
then press SET.
The DISC TITLE SEARCH
screen appears.
4. Press
5 / ∞ / 2 / 3 to move
in front of the
first character of the disc title you want to search
for, then press SET.
To correct the incorrect entry, press 5 / ∞ / 2 / 3 to move
in front of the correct character, then press SET.
Note:
Symbols such as @, # or $ are not be available for search.
5. Press SET again.
Disc search starts, then the
SEARCH RESULT screen
showing the disc titles
appears.
6. On the SEARCH RESULT screen, you can do the
following:
• Changing the indication of the disc information: Press 5 or
∞ to move to a searched-for disc, then press 2 or 3. Each
time you press 2 or 3, the disc information alternates
between its performer and its disc title.
• Starting a disc play and going to the Disc Information
screen (see page 45): Press 5 or ∞ to move to a
searched-for disc, then press SET.
• Showing unseen disc information (if more than 5 discs are
listed as a result of the search): Press 5 or ∞ until they
appear.
• Going back to the DISC TITLE SEARCH screen: Press
EXIT.
EN43-48.RX-8020V[UJ]_f 02.5.22, 9:55 AM 46