JVC HM-DH40000U - Manual (Page 69)

EN
69
When programed (set) with a manufacturer’s (brand’s)
code, this Remote can perform some of the remote
control functions of the listed cable boxes. If your cable
box does not function with a specified code, try other
codes.
1 Turn on the cable box
Turn on the cable box using the Power button on
the cable box or its Remote.
2 Set remote operation mode
Set the VCR/TV/CABLE/DBS selector to “CABLE/
DBS”.
3 Enter cable box brand code
Follow the example shown below.
1
Press and hold POWER.
2 Press the Number keys to enter your cable
box’s brand code by referring to the table
below.
3 Press STOP ( 7 ), and release POWER.
● Once you have set the Remote to operate a
cable box, you do not have to set it again until
you replace the Remote’s batteries.
4 Operate cable box
Press one of the following buttons: POWER, TV/
VCR CH +/–, and Number keys.
● For some brands, you must press ENTER after
having pressed the Number keys to enter a
channel number.
● To change the cable box’s channels, press
TV/VCR CH +/– or the Number keys.
● To operate the VCR, set the VCR/TV/CABLE/
DBS selector back to “VCR”.
NOTES:
● Depending on the type of cable box, some or all functions
cannot be operated using this Remote.
● It is impossible to control a cable box that does not have a
remote sensor.
● It’s not possible to set the Remote for both your cable box and
a DBS receiver at the same time. You can only set the Remote
to operate one of these units at a time.
CABLE BOX BRAND NAME BRAND CODE
ARCHER 01, 05, 17
CABLETENNA 01, 17
CABLEVIEW 15, 16, 17, 21, 25
CITIZEN 15, 16, 17, 21, 25
CURTIS 02
DIAMOND 01, 17
GC BRAND 15, 16, 17, 21, 25
GEMINI 15
GENERAL INSTRUMENTS 01, 04, 06, 11, 12, 15, 28
HAMLIN 10, 18, 23
JASCO 15
JERROLD 01, 04, 06, 11, 12, 15, 28
NOVAVISION 02
OAK 07
PANASONIC 13, 14
PULSER 15, 16, 17, 21, 25
RCA 13, 14
REGAL 10, 18, 23
REMBRANDT 01, 16, 17
SAMSUNG 05, 16, 24
SCIENTIFIC ATLANTA 02
SIGMA 07
SL MARX 05, 16, 17, 24, 25
SPRUCER 13, 14
STARGATE 05, 15, 16, 17, 21, 24, 25
TELEVIEW 05, 16, 24
TOCOM 01, 04, 16
UNIKA 01, 17
UNIVERSAL 16, 17, 25
VIDEOWAY 03, 09, 22
ZENITH 03, 09, 22
(Ex.) To set the Remote to RCA 14:
Hold
down
Press in succession Release
Cable Box
Brand Setting
POWER
. , ? GHI
STOP
VCR
TV
CABLE
/DBS
2
4
TV/VCR
CH +/–
ENTER
3
- 1,3
4
3
- 3
3
- 2
4
Number keys
HM-DH40000U-EN64-71 1/22/3, 5:45 PM 69