JVC HM-DH40000U - Manual (Page 53)

EN
53
VCR
TV
CABLE
/DBS
2
-
5
1 6
BACK
You can use the other useful function settings on the
Function Set Up screens by following the procedure
described below.
The table below shows the structure of the menu system.
● For the functions you can set on the Function Set Up
screen, see pages 54 to 59.
1 Access Main Menu screen
Press MENU.
2
Access Function Set Up screen
Press @ # to move the
arrow to
“FUNCTION SET
UP”, then press
fi or
OK.
3 Select Function Menu
Press @ # to move
the arrow to the
menu of the function
you want to set, then
press
fi or OK.
4 Select Function
Press %fi to move
the arrow to the
function you want to
set.
5 Change setting
Press @ #.
6 Return to normal screen
Press MENU.
NOTE:
To go back to a previous screen during settings, press BACK.
OTHER USEFUL FUNCTIONS
Useful Function
Settings
FUNCTION
SET UP
VIDEO FUNCTION ( ੬ pg. 54)
AUDIO FUNCTION ( ੬ pg. 55)
IN/OUT FUNCTION ( ੬ pg. 56)
ADDITIONAL ( ੬ pg. 57)
FUNCTION SET UP INITIAL SET UP TUNER SET UP
THEN PRESS [OK]
V. CALIBRATION
PICTURE CONTROL AUTO
ON
ON DIGITAL R3
VIDEO STABILIZER
VIDEO FUNCTION AUDIO FUNCTION IN/OUT FUNCTION ADDITIONAL
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
OFF
FUNCTION SET UP INITIAL SET UP TUNER SET UP
THEN PRESS [OK]
V. CALIBRATION
PICTURE CONTROL AUTO
ON
ON DIGITAL R3
VIDEO STABILIZER
VIDEO FUNCTION AUDIO FUNCTION IN/OUT FUNCTION ADDITIONAL
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
OFF
FUNCTION SET UP INITIAL SET UP TUNER SET UP
THEN PRESS [OK]
V. CALIBRATION
PICTURE CONTROL AUTO
ON
ON DIGITAL R3
VIDEO STABILIZER
VIDEO FUNCTION AUDIO FUNCTION IN/OUT FUNCTION ADDITIONAL
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
OFF
● Turn on the VCR and the TV, and select the AV
mode on the TV.
● Set the VCR/TV/CABLE/DBS selector on the
Remote to “VCR”.
HM-DH40000U-EN53-63 1/22/3, 5:45 PM 53