JVC CA-UXHB4 - Manual (Page 30)

27
Using the Timers
There are four timers available—Daily Timer (Just Once,
Every Day, Weekly), Recording Timer, Snooze Timer, and
Sleep Timer.
• Before using these timers, make sure the built-in clock is
set correctly (see page 9).
Using Daily Timer and Recording Timer
You can set the timer whether the unit is on or off.
How the Timer actually works
When the on-time comes, the unit automatically turns on (the
[timer] indicator flashes and continues flashing while the
timer is operating). Then, when the off-time comes, the unit
automatically turns off (standby). The timer setting remains
in memory until you change it.
• When the
(timer) and 1, 2, 3, or with DAILY or
WEEKLY indicators are lit on the display, the timer acts as
the Daily Timer. Once the timer has been set, it will be
activated at the same time on the selected day and
automatically turns off (standby) after 60 minutes everyday
until the timer is deactivated.
• When the (timer) and the REC indicators are lit on the
display, the timer acts as the Recording Timer. After the
timer-recording finishes, the details of the setting remain
stored but the timer is turned off.
Before you start...
When using “TUNER” as the source to play, make sure to
select the desired station before turning off the power.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start again from step 1.
TIMER
On the remote control ONLY:
1
Press TIMER repeatedly to select the
timer you want to adjust and activate
— 1, 2, 3, or Rec.
The timer setting indicator and hour indication start
flashing on the display.
Each time you press the button, the display changes as
follows:
2
Set the on-time you want the
unit to turn on.
(1) Press UP or DOWN to set the hour,
then press SET.
(2) Press UP or DOWN to set the minute,
then press SET.
If you want to change the time setting, press
CANCEL.
• If you are setting the Daily Timer, the mode
setting appears on the display.
\ Go to step 4.
• If you are setting the Recording Timer,
the off-time setting appears on the display.
3
For the Recording Timer ONLY:
Set the off-time you want the unit to turn off.
(1) Press UP or DOWN to set the hour, then press SET.
(2) Press UP or DOWN to set the minute, then press SET.
If you want to change the time setting, press
CANCEL.
\ Go to step 5.
4
For the Daily Timer ONLY:
Select the timer repeat mode.
Press UP or DOWN to select the mode
setting, then press SET.
SET
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL DOWN
SEARCH/
SCROLL UP
/
SELECT
PRESET
GROUP
PRESET GROUP
UP
DOWN
SEARCH/
SCROLL DOWN
SEARCH/
SCROLL UP
/
SELECT
1 2 3
REC. Normal indication
SET
27-29_UX-HB4[B]6.p65 04.8.5, 6:17 PM 27