JVC CA-UXHB4 - Manual (Page 16)

13
Total track number Total playing time
When stop playing audio CD:
When stop playing MP3 disc:
• Total playing time does not appear when MP3 disc is
loaded.
To remove the disc, press ) OPEN on the unit, then take out
the disc by holding it at the edges while pressing the unit’s
pivot lightly.
• If the disc cannot be read correctly (because it is scratched,
for example) or an unreadable CD-R or CD-RW is inserted
Playback will not start.
• If no disc is inserted
“No Disc” appears on the display.
DO NOT open the disc cover by hand as it will be
damaged.
Current group number Current track number
Basic Disc Operations
While playing a disc, you can do the following operations.
To stop playing for a moment
During playback, press CD
3/8.
While pausing, “Pause” appears and elapsed playing
time flashes on the display.
To resume playing, press CD
3/8 again.
For Audio CD:
To go to another track
During playback, press ¢ or 4 (or
SCROLL UP ¢ or SCROLL DOWN
4 on the unit) repeatedly.
•
¢ (SCROLL UP ¢):
Skips to the beginning of the
next or succeeding tracks.
• 4 (SCROLL DOWN 4):
Goes back to the beginning of the
current or previous tracks.
Before or after playback, press CD 3/8 to start playback
after selecting the track to play back by pressing ¢ or 4.
CD
3/8
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) before or
during play allows you to start playing the
track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then
press 5.
For track number 20, press +10 twice,
then press 0.
To locate a particular point in a track
During play, press and hold ¢ or 4
(or SCROLL UP
¢ or SCROLL DOWN
4 on the unit).
• ¢ (SCROLL UP ¢):
Fast-forwards the tracks.
• 4 (SCROLL DOWN 4):
Fast-reverses the tracks.
For MP3 disc:
To go to another track
To select a track within a same group,
press
¢ or 4 (or SCROLL UP ¢ or
SCROLL DOWN 4 on the unit) repeatedly, then
press CD
3/8.
To select a track from a different group
1 Press PRESET GROUP or
PRESET GROUP to select a group
number.
As you press the button, group number
changes.
2 Press ¢ or 4 (or SCROLL UP
¢ or SCROLL DOWN 4 on the
unit) to select a track number.
As you press the button, track number
changes.
• The track names also appear.
3 Press CD 3/8.
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL DOWN
SEARCH/
SCROLL UP
/
SELECT
Selected group number
Selected track number
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL DOWN
SEARCH/
SCROLL UP
/
SELECT
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/ SCROLL
DOWN
SEARCH/ SCROLL
UP
/
SELECT
CD
3/8
1 2 3
4 5 6
7 8
0
9
+10
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/ SCROLL
DOWN
SEARCH/ SCROLL
UP
/
SELECT
Cursor
Cursor
12-16_UX-HB4[B]6.p65 04.8.5, 6:16 PM 13