JBL Professional DPC-2 - Manual (Page 14)

14 Venue Performance Series User’s Guide
Allen Products
(562) 424-1100
1635 E. Burnett Street
Signal Hill, CA 90806
www.allenproducts.com
M.A.N. Flying Systems
20 Sidar Road Brook Road
Industrial Estate
Rayleight, Essex SS6 7XF U.K.
www.manfly.co.uk
JBL Professional - Tech Note V1 No. 14
“Basic Principles for Suspending Loud-
speakers”
www.jblpro.com/technote/tn_v1n14.pdf
ATM Fly-Ware
(562) 424-1100
1635 E. Burnett Street
Signal Hill, CA 90806
www.atmflyware.com
McMaster Carr
Various locations through the U.S.A.
For a location near you, visit them online:
www.mcmastercarr.com
Safe Rigging
The JBL VP Series suspendable loudspeakers are supplied with built-in brackets. The system is designed to
facilitate the suspension of the loudspeaker by a qualified person familiar with rigging hardware and industry
practices. Improper installation may result in damage, injury or death.
Working Load Limit
The working load limit (WLL) of the JBL VP 7210/95DP suspendable loudspeaker shall be maintained as long
as no more than 46 kg (100 lb) is suspended by TWO (2) of the PRIMARY SUSPENSION points (M10 forged
Shoulder Eyebolts). The VP7210 includes two M6 suspension points located on the rear of the cabinet that
are solely intended for use as pullback points and are not considered as Primary Suspension points. Each
M6 fitting has a WLL of 23 kg (50 lbs).
A kit containing three M10 forged-shoulder eyebolts with washers is available as JBL Part number 229-
00009-01. For VP7210/95DP rear pullback point applications, order JBL part number 364287-001. This kit
includes one M6 forged-shoulder eyebolt with washer. For additional suspension components, contact a
professional rigging hardware supplier.
NOTE: M6 forged eyebolts used for VP7210/95DP pullback points require a minimum thread length of 25.4
mm (1in).
Industry Resources