JVC HR-XVS44U - Manual (Page 12)

Filename [XVS44U_06Index.fm]
Masterpage:Left+
12
EN
Page 12 25 August 2003 10:46 am
INDEX (cont.)
ON-SCREEN DISPLAY (VCR deck)
If you press DISPLAY on the Remote when “SUPERIMPOSE” is set to “ON” (
੬
pg. 77), various operational indicators
appear on the TV screen.
For On-screen display for DVD deck, refer to “Using the on-screen bar” (
੬
pg. 48).
A Operation Mode Indicators
B Tape Speed (SP/EP)
C Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press REW (3)
or FF (5) from the Stop
mode or perform an Index
Search. (
੬
pg. 30) The
position of “q” in relation to
“0” (beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
D Index number ੬ pg. 30
E Tape Remaining Time Indicator ੬ pg. 34
F Counter Display
G Audio Mode Display
੬ pg. 31
H SAP Indicator ੬ pg. 34
I Stereo Program Indicator ੬ pg. 34
J Day/Clock Display
K Channel Position Number/Auxiliary Input
Indicator (F-1 or L-1)
L “Cassette Loaded” Mark
Beginning End
To recall an indication
A Press DISPLAY.
● All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, remain on the screen.
B Press DISPLAY again to clear the display.
● The RECORD/PAUSE indication remains on the screen.
XVS44U_01.book Page 12 Monday, August 25, 2003 11:08 AM