beautypg.com

Troubleshooting – JVC HD-52Z585 User Manual

Page 66

background image

Troubleshooting

66

The following are not malfunctions.

• The television may make a creaking sound if the temperature of the room or the temperature

inside the television changes. If there is no problem with the screen or sound, then there is no
need to worry.

• The lamp may make a noise when it blows, but this is not dangerous.

• The lamp may make a noise when the power is turned on and a picture is displayed on

the screen. This noise is caused when the mercury inside the lamp is heated, and is not a
malfunction.

• The still parts of a picture may remain on the screen. This is a characteristic of HD-ILA

elements and not a malfunction. The picture will disappear over time.

• The operation of this television is not guaranteed below 0ºC. If the power is turned on while

the temperature is below 0ºC, the picture may be disturbed. Use the television when the
temperature is 0ºC or higher.

• Although the HD-ILA element is manufactured with high-precision technology, please

understand that some pixels may be lost or permanently displayed.

• There is a cooling fan built-in to the television. Please understand that this fan will make some

noise when the television is on and while cooling.

• Although the picture may be temporarily disturbed and noise may be seen on the screen if the

power is turned on immediately after it has been turned off. This is not a malfunction.

PROBLEMS

CHECK

Static electricity

You hear occasional
crackling sounds

• It is normal to feel static electricity if you brush or touch the screen.

• It is normal for the TV to make crackling sounds when first turned on or off. Unless
the sound or picture become abnormal, this is fine.

There is no sound
from the TV's
speaker

• The Center CH Input may be turned on. See page 47.
• The TV Speaker option may be turned off. See page 46.

The AUTO DEMO
finished automatically

• The TV recieved a signal from the AV CompuLink
• The On Timer that you programmed has started.
• The channel that the AUTO DEMO is using is a channel that is blocked by V-Chip.
• The Auto Shut Off that you programed has occured.

HD-ILA Eng "C" 66

10/25/04, 12:12:06 PM

This manual is related to the following products: