JVC HR-DD750U - Manual (Page 49)

EN
49
7 8 9
0 4
1
3
Edit From A
Camcorder
You can use a camcorder as the player and your VCR as the
recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder’s VIDEO
OUT and AUDIO OUT connectors and your VCR’s
VIDEO IN and AUDIO IN connectors.
● When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
● If connecting to a camcorder with a monaural output,
connect the audio output connector on the
camcorder to AUDIO IN L of the VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into the recorder.
SET RECORDER’S INPUT
MODE
3
Set to "AUX". Press the NUMBER key “0” and/or CH to
select depending on the connector being used – "L-1"
for the rear AUDIO/VIDEO IN connector, or "F-1" for
the front AUDIO/VIDEO IN connector.
If you’re using a JVC Master Edit Control-equipped
camcorder — step 4
If not — step 8
ACCESS MAIN MENU
SCREEN
4
Press MENU.
ACCESS FUNCTION SET
SCREEN
5
Press CH
5∞ or %fi to move the highlight bar (arrow)
to “FUNCTION SET”, then press OK or .
NUMBER "0"
%
Recorder Your VCR
To rear panel REMOTE PAUSE/
AV COMPULINK connector
Mini-plug cable (not supplied)
(JVC camcorder only)
Audio/Video cable
(supplied)
Camcorder
Player
VIDEO OUT
AUDIO OUT
EDIT
VIDEO
IN
AUDIO
IN
CH
OK
OK
MENU
MENU