JVC HR-DD750U - Manual (Page 34)

34
EN
1 2 3
4 5 6
7 8 9
0
2
4
1
3
TimeScan
Your VCR is equipped with the TimeScan function. TimeScan
allows noise free pictures to be displayed on your TV screen in
the forward and reverse search modes. Audio will be played back
at normal speed during any of the TimeScan modes (
੬
pg. 35).
TimeScan allows you to view a program in search mode while
listening to the audio.
NOTES:
● "TIMESCAN AUDIO" must be set to "ON", or the sound will
not be heard in TimeScan mode (
੬
pg. 35).
● The audio will not synchronize with the video in TimeScan
modes.
● In Pause mode 3 seconds (approx.) of audio will be played
back repeatedly. (
੬
pg. 24)
● In TimeScan search modes some of the audio information will
not be played so that the audio can keep up with the video.
PLAYBACK AND RECORDING FEATURES (cont.)
1 2 3 4 5
Audio signal during TimeScan
Sound of 1, 3 and 5 is heard.
Sound of 2 and 4 is not heard.
Output audio signal is normal (monaural) sound.
Playback tape
PLAY
ACTIVATE VARIABLE-SPEED
SEARCH
1
During playback, repeatedly press and release TIME
SCAN ™ or £ to select the search speed.
(Refer to the chart on page 35 for playback speeds).
● To increase the speed in the forward direction, press
and release £ repeatedly to select the various
forward search modes.
● To decrease the speed in the forward direction, press
and release ™.
● To play in reverse slow motion, and in reverse play
mode, continue to press ™ repeatedly after
selecting all the forward slow motion modes.
(Refer to the chart on page 35 for playback speeds).
To resume normal playback, press PLAY.
Variable-Speed Search/
Reverse Motion Playback
PLAY
TIME SCAN
TIME SCAN
CH
MENU
OK
PAUSE
CH
OK
PAUSE
MENU
If the picture jitters vertically during variable-speed
search:
1 Press PAUSE.
2 Press CH 5 (+) or ∞ (–) so that the vibration stops.