JVC UX-V9RMD - Manual (Page 7)

3
Engli
s
h
CAUTION: Make all connections before plugging the System into an AC power outlet.
Rear Panel of the Unit
Using the Supplied Wire Antenna
Using the Coaxial Type Connector (Not Supplied)
A 75-ohm antenna with coaxial type connector (IEC or DIN45 325)
should be connected to the FM 75-ohm COAXIAL terminal.
If reception is poor, connect the outdoor antenna.
Note: Before attaching a 75 ohm coaxial lead (the kind with a
round wire going to an outdoor antenna), disconnect the
supplied FM Wire Antenna.
Rear Panel of the Unit
CAUTION: To avoid noise, keep antennas away
from the System, the connecting cord and the AC
power cord.
Connecting the FM Antenna
L
OPTICAL
DIGITAL IN
(AUX2)
R
L R
FM wire antenna (supplied)
Coaxial cable
FM outdoor antenna
(Not supplied)
Connecting the AM (MW/LW) Antenna
L
OPTICAL
DIGITAL IN
(AUX2)
R
L R
Attach the AM loop to its base by snapping the tabs on the
loop into the slot in the base.
AM loop antenna (Supplied)
AM EXT
AM LOOP
FM (75 Ω )
COAXIAL
ANTENNA
Turn the loop until you have the best reception.