JVC UX-V9RMD - Manual (Page 23)

19
Engli
s
h
■
Use the Remote Control to carry out this function.
■
1. Insert an MD to be edited with its label side
up.
■
2. Press the MD #8 button and then 7 button
to set the function to MD.
The track numbers and total playback time are displayed.
■
3. Press the EDIT/TITLE button until “DIVIDE ?”
is displayed.
The “EDIT” indicator appears on the display.
DIVIDE = JOIN = MOVE = ERASE = ALL ERASE
= DISC TITLE = TITLE = (Back to the beginning)
■
4. Press the SET button.
• The first track will be repeatedly played.
■
5. Select the track number to be divided.
The selected track is automatically played.
To select the track number, press the UP, DOWN, >, or < button.
UP button:
Increases the track number by 1.
DOWN button: Decreases the track number by 1.
> button:
Rapidly increases the track number.
< button: Rapidly decreases the track number.
Example: For track 3, press the UP button three times. For track
12, use the > button to rapidly increase the track
number (or simply press the UP button 12 times.)
■
6. Press the SET button at the point where
the track is to be divided.
• The selected track is divided into two tracks and the track
number in the music calendar will increase by 1.
• The recording lasting for 4 seconds starting where the track
was divided is repeatedly played for your reference.
• Movement is possible within the POSITION-128 to 128 range
(about 8 seconds before or after the position). To move the
point, press the UP, DOWN, > or < button. The recording last-
ing for 4 seconds starting from the position to which the divid-
ing point has been moved is repeatedly played.
■
7. Press the SET button.
■
8. Press the EDIT/TITLE button.
The “EDIT” indicator disappears on the display.
■
9. Press the MD
0 button to complete editing.
The MD is ejected after “UTOCwriting” is displayed.
•
You can also complete editing operation by pressing the
button to turn off the power.
To cancel the operation, press the CANCEL button in step 4
through 7 until the display returns to the original display before ed-
iting the track.
Note: While “UTOCwriting” is displayed, do not disconnect the
power cord or subject the Unit to the vibration to avoid in-
correct recording.
Dividing Tracks
(DIVIDE Function)
EDIT
/TITLE
SET
Playback time of the track Track to be divided
SET
SET
Alternates