Technical data, Installation, Positioning – John Lewis JLFFW175 User Manual
Page 16: Location

Technical data
JLFFW175
JLFFIN175
Dimension
Height
1750 mm
1750 mm
Width
595 mm
595 mm
Depth
658 mm
658 mm
Rising Time
20 h
20 h
Voltage
230 V
230 V
Frequency
50 Hz
50 Hz
The technical information are situated in the
rating plate on the internal left side of the
appliance and in the energy label.
Installation
Read the "Safety Information"
carefully for your safety and correct
operation of the appliance before
installing the appliance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the
climate class indicated on the rating plate of
the appliance:
Climate
class
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Location
The appliance should be installed well away
from sources of heat such as radiators,
boilers, direct sunlight etc. Ensure that air
can circulate freely around the back of the
cabinet. To ensure best performance, if the
appliance is positioned below an
overhanging wall unit, the minimum distance
between the top of the cabinet and the wall
unit must be at least 100 mm . Ideally,
however, the appliance should not be
positioned below overhanging wall units.
Accurate levelling is ensured by one or more
adjustable feet at the base of the cabinet.
16