JVC 1EMN24939 - Manual (Page 21)

21
EN
INTRODUCTION
PREPARATION
WATCHING TV
OPTIONAL SETTING
OPERATING DVD
DVD SETTING
TROUBLESHOOTING
INFORMATION
English
5Channel List
The channels selected here can be skipped when selecting the channels
using [CHANNEL
- / +].
Those channels can still be selected with [the Number buttons].
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select “CHANNEL”, then press
[ENTER].
PICTURE
S OUND
CHANNEL
DETAIL
LANGUAGE
DVD
3
Use [Cursor K / L] to select “Channel List”, then press
[ENTER].
h Channel
Autoscan
Channel List
Manual Register
Antenna
PICTURE
S OUND
CHANNEL
DETAIL
LANGUAGE
DVD
4
Use [Cursor K / L] to select the channel you want to
remove, then press [ENTER].
h i Channel List
DTV 8 DTV 8
9
DTV 48
58
DTV 6
27
DTV 67
Ch Select Watch/Skip E TER
Highlight channe s for Ch
Up/Down key selection
Back BACK
PICTURE
S OUND
CHANNEL
DETAIL
LANGUAGE
DVD
• The channel display for the removed channel
darkens. You will not be able to select the channel
again using [CHANNEL / ].
• To reactivate a removed channel, use [Cursor
K / L] and
press [ENTER]. The registered channels are highlighted.
• When you remove a main channel, its subchannels
are removed as well.
Note:
• The channel with the “DTV” indicated on the display is
ATSC. Otherwise the channel is NTSC.
5
Press [SETUP] to exit.
5Manual Register
This function lets you add the channels that were not added by
the autoscan due to the receptible condition at the initial setting.
1
Press [SETUP] to display the main menu.
2
Use [Cursor
K / L] to select “CHANNEL”, then press
[ENTER].
PICTURE
S OUND
CHANNEL
DETAIL
LANGUAGE
DVD
3
Use [Cursor K / L] to select “Manual Register”, then
press [ENTER].
Channel Channel
Autoscan
Channel List
Manual Register
Antenna
PICTURE
S OUND
CHANNEL
DETAIL
LANGUAGE
DVD
4
Use [the Number buttons] to enter the number of the
channel you want to add, then press [ENTER].
g Manual Register
Reg ster
Ch Change
11
For analog channels select a
channel to register using number
keys
For digital channe s you must
perform Autoscan function
PICTURE
S OUND
CHANNEL
DETAIL
LANGUAGE
DVD
Back BACK
5
Press [SETUP] to exit.
Note:
• If setup completes successfully,
“Added to the channel list” is displayed.
• If external input is used, it is not possible to register the
channel and “Unavailable” will be displayed on the TV
screen.
• By using [CHANNEL - / + ], you can select the memorized
channels only.