JVC GET0248-001B - Manual (Page 32)

32
ENGLISH
Symptoms Causes Remedies
CD changer
• “NO DISC” appears on the
display.
No disc is in the magazine. Insert disc into the magazine.
Disc is inserted upside down. Insert disc correctly.
• “NO MAG” appears on
the display.
No magazine is loaded in the
CD changer. Insert the magazine.
• “RESET 8” appears on the
display.
This receiver is not
connected to the CD changer
correctly. Connect this receiver and the
CD changer correctly and
press the reset button of the
CD changer.
• “RESET 1” – “RESET 7”
appears on the display.
Press the reset button of the
CD changer.
• The CD changer does not
work at all.
The built-in microcomputer
may function incorrectly due
to noise, etc. Reset the receiver (see page
2).
SIRIUS
• “CALL 1-888-539-
SIRIUS TO SUBSCRIBE”
scrolls on the display.
Subscription has not been
done. Starts subscribing (see page
24).
• “NO SIGNAL” scrolls on
the display.
Signals are too weak. Move to an area with
stronger signals.
• “NO ANTENNA” scrolls
on the display.
The antenna is not connected
firmly. Connect the antenna firmly.
• “NO CH” appears on the
display for about
5 seconds, then returns to
the previous display.
No broadcast on the selected
channel. Select another channel or
continue listening to the
previous channel.
• “NO (information)*”
appears or scrolls on the
display.
No text information for the
selected channel.
• No sound can be heard. “UPDATING” flashes on
the display. The receiver is updating the
channel information and
it takes a few minutes to
complete.
• SIRIUS radio does not
work at all.
The built-in microcomputer
may function incorrectly due
to noise, etc. Reconnect the SIRIUS radio
after a few seconds.
* NO CATEGORY, NO CHANNEL, NO ARTIST, NO COMPOSER, and NO SONG/PROGRAM
EN30-33_KD-AR360_G310[J]f.indd 32 9/28/04, 10:44:46 AM