Audio channel selection – JVC LPT0838-001C User Manual
Page 57
Masterpage:Right-No-Heading
EN
57
Filename [XVC33U_08DVD.fm]
Page 57
22 July 2003 3:19 pm
Audio Channel Selection
When you play certain karaoke (DVD/Video CD/SVCD), you can
enjoy karaoke by selecting the audio channel to play.
● The sound of each audio channel depends on the contents of
the disc.
● During playback
When using the on-screen bar
A
Access the on-screen bar.
Press PLAY SETUP twice. The on-screen bar appears on
the TV screen.
B
Select menu item.
Press w e to move 0 to
, then press OK.
● The following pop-up window appears under the selected
item.
Example: “ST” (stereo) is selected.
C
Select the audio channel.
Press rt repeatedly to select the desired audio channel,
then press OK.
● Each time you press the button, the audio channel changes.
To clear the on-screen bar
Press PLAY SETUP.
When using the A.MONITOR button:
A
Access the menu.
Press A.MONITOR.
● The following pop-up window appears on the TV screen.
Example: “ST” (stereo) is selected out of 3 audio channels
recorded.
B
Select the audio channel.
Press rt or A.MONITOR repeatedly to select the
desired audio channel, then press OK.
● Each time you press the button, the audio channel changes.
● The pop-up window disappears if no operation is done for
about 5 seconds.
For Video CD
ST]L]R](Back to the beginning)
For SVCD
ST 1]ST 2]L 1]R 1]L 2]R 2](Back to the beginning)
ST:
To listen to normal stereo playback.
L:
To listen to L (left) audio channel only.
R:
To listen to R (right) audio channel only.
ST 1/ST 2:
To listen to normal stereo playback of ST 1 or
ST 2 channel.
L 1/L 2:
To listen to the L (left) 1 or 2 audio channel.
R 1/R 2:
To listen to the R (right) 1 or 2 audio channel.
XVC33U_01.book Page 57 Tuesday, July 22, 2003 3:20 PM